Brakes/Levers/Pads

- Replacement barrel adjuster for FR5 and SD7 levers - Includes one pair

Attach your IS Mount disc brake brackets with premium SRAM mounting bolts. These bolts are made from stainless steel for a lifetime of use and come with thread-locking compound already applied.

Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.

Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.

Slip Avid's Rim Wrangler 2 Brake Pad Inserts into your Rim Wrangler 2 cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze. They're designed for use with linear-pull brakes.

Bolt on Avid's Rim Wrangler 2 Brake Pads for excellent stopping power. The cartridge design makes it easy to switch pads when they wear out. They're designed for use with linear-pull brakes.

Slip Avid's Shorty Brake Pad Inserts into your Shorty cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.

The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone

Built around one of our original breakthrough designs, the Speed Dial 7 is the smooth and powerful way to control linear-pull or mechanical disc brakes. They are super easy to install and adjust so you can dial in the modulation just the way you like. - Compatible with mechanical disc brakes and linear-pull brakes. - Reach Adjust and Speed Dial Leverage Adjust - Reversible

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Bolt on Avid's Shorty Brake Pads for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.

Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Bolt on Avid's Shorty Ultimate Brake Pads for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.

Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that allow the caliper to move as you install your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get excellent caliper alignment! This kit includes ultra-light titanium hardware with washers for CPS (Caliper Positioning System) mounting.

For the ultimate light-weight brake setup, Avid ditched the concentric caliper-centering washers and gave you titanium bolts to save precious grams. This kit includes ultra-light titanium hardware for standard (direct-mount) mounting.

The power starts here. With a unique design that helps keep dirt and grime from mucking up your ride, Avid's CleanSweep rotors provide the power you need in the lightweight package you want.

Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote for maximum convenience and ease of use.

Avid's BB7 is the mechanical-disc brake that raises the bar. It boasts dual pad-adjustment knobs and Avid's ingenious Tri-Align caliper-positioning system so you can dial in perfect braking in seconds. The BB7 also utilizes precision actuation and variable spring tension to give you serious stopping power and out-of-this-world modulation. And, this setup comes with Avid's CleanSweep rotor for consistent, powerful braking and tool-free pad replacement for easy maintenance.

Avid's BB7 MTN S Mechanical Disc Brake delivers with power, control, and a sleek black anodized finish that makes this brake look as fast as you feel. You'll love the simple cable pull system that's optimized for linear-pull levers. Avid's ingenious Tri-Align caliper-positioning system perfectly aligns the pads parallel to the rotor in seconds for powerful braking with positive modulation in any condition. This brake kit includes an HS1 rotor for solid stopping power.

Disc brake power, rim brake weights — at 170-grams per caliper Avid's BB7 Road SL brakes pack a punch in a flyweight package. Used with your road-style, drop bar levers, they provide precision actuation as well as tool-free pad wear adjustment and replacement. Avid's ingenious Tri-Align caliper-positioning system perfectly aligns the pads parallel to the rotor in seconds for powerful braking with positive modulation in any condition. Plus titanium mounting and rotor bolts shave even more grams on this great disc setup.

- Designed for linear pull & mechanical disc brakes - Aluminum construction - 2.5 finger - 22.2mm (7/8-inch) clamp - Left/Right: Right - Reach adjust and return spring - 88g each

• Designed to keep dust and dirt out of V-Brake cable/housing systems

Standard linear pull brake pads for an economical replacement. Genuine replacement parts Reliable Bontrager stopping power for optimal operation and safety. - Standard compound (STD)—All-around rubber pad compound - Sold in pairs

The Bontrager Carbon Stop Cork pad was engineered by Keith Bontrager specifically to work with carbon rims. Designed to dissipate heat on long descents and decrease rim wear, they will keep you coolly in control on even the most challenging mountain stages. Key features: - Engineered especially for use with carbon rims - Designed by Keith Bontrager for professional cyclists - Unique cork compound reduces braking heat and wear on rim

Key features: - Designed for use on carbon rims - Confirm wheel compatibility before use - Use in mud and grit will accelerate rim wear - 520554 is the Shimano style Flash Evo and fits Shimano and SRAM - 520555 is the Campagnolo style Race Pro

With Bontrager's Race XXX Lite Aero Brake Levers you'll get winning aerodynamics with no-compromise ergonomics, comfort and power. Not only are they aero, they're super light, thanks to full carbon construction. They have adjustable reach, and combined with the high-fulcrum cable pull and stiff return spring, they offer the best lever feel available. No squishy braking, they stop you like they mean it. Tool-free adjustable cable tension means you can tune your brakes on the fly or switch between your race wheels and your training wheels easily, too. They fit any bullhorn style bars with internal routing.

Simple, economical threadless post mount caliper brake pads. - Rubber compound improves performance over many OE pads

Cane Creek's 200TT Brake Levers are perfect for bullhorn-style bars and other TT base bars. Aluminum levers and aluminum mounting brackets mean low weight and excellent longevity. There's even a rubber end plug that perfectly sized for your thumb!

- Hayes service parts for calipers - Rebuild kits include: (2) caliper pistons with square profile seals, transfer port o-ring, and caliper bleeder with cap

- T100 Sintered Metallic: long-life, all-condition compound - T106 Semi Metallic: no-bed, shorter-life, quieter compound - Set includes one pair of pads with retention clip

- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts

Brass compression olive for Hope hydraulic disc brakes.

Brass hose insert for Hope hydraulic disc brakes.

The Eagle 2 is a revolutionary pad that first utilized the hardened reinforced steel internal backbone. This larger pad has been used in all areas of cycling and is a good choice when frame, wheel and fork design allow. Features: - Hardened and Plated reinforced steel backbone - Patented Angled tip plow - Water grooves - Pad-Lock washer system - Available in Threaded and 2024 Aluminum Smooth Post Black: standard compound designed for dry condition riding Red: semi-aggressive compound for good performance Salmon: aggressive compound for extreme weather conditions Dual: combination of Salmon and Black compounds for more controlled, smoother stopping

Kool-Stop disc pads are made with organic materials that are blended and bound together using a resin. The compounds do include small amounts of metal to improve the braking formula but though this is a mined material the pads are largely organic. The term semi-metallic can also be used. Kool-Stop has found during testing that their disc pads are Rotor Friendly and provide high performance braking throughout the life of the pad. - Qty 1 = enough for 1 wheel

- High performance compounds recommended for all-conditions - Steel backing

- Reinforced hydraulic tubing designed for Magura mineral-oil fluid - Tubing kits are cut-to-fit with one pre-crimped 'fixed' end (90-degree on MT series and Gustav-M) and include one tubing reinforcement insert and compression ferrule/olive per kit - Sold each: (1) kit per brake - Bulk tubing is for RT series road rim brakes, HS-series rim brakes and Julie disc brakes: fittings sold separately - Choose black or white options for MT Next and MT series

8 Series Disc Brake Pads - Disconnected two piece back plate - The Sport Compound offers powerful braking, high durability, and short bed-in time, making it the perfect brake pad for use with e-bikes - Set of four disc brake pads and two pad retaining bolts for one caliper

9 Series Disc Brake Pads - One piece connected back plate - Performance compound offers excellent bite for strong braking response in a variety of conditions - Pair of disc brake pads for one MT5, MT7 caliper

Magura mdr-c disc brake rotor - 203mm 6-bolt for ebike silver The Magura MDR-C disc brake rotor is an ideal all-rounder – for city, trail and e-bikes. The improved lateral rigidity reduces vibrations and noise during braking, and also has improved heat resistance and increased stability. - Optimized for eBike use - Prepared for tone wheel or magnet - Wear optimized ring design

- The Storm HC rotor is designed for extreme use and unparalleled braking performance under high braking forces.

Magura Storm CL Disc Brake Rotor - Centerlock with lockring for thru axle

Increase your brake performance with Origin-8's Super Noodle. The Super Noodle allows you to run housing all the way to the brake, making the brake respond much smoother and stronger than with a steel or alloy noodle. This sealed noodle also prevents moisture and grime from corroding the cable. • Lightweight resin/alloy design

Improve the performance and set up of your V-brakes with Origin-8's V-Brake Barrel Adjuster Noodle. Standard 90° stainless steel noodle with built-in barrel adjuster for precise brake cable adjustment. Compatible with most V-brake systems.

Origin-8's Pro Pulsion Classic Road Caliper offers excellent braking power for road bikes. A dual pivot design provides solid stopping power and the forged aluminum construction keeps the weight low. A variety of reaches ensure proper fitment and the vast array of colors and finishes let you match your ride, or add an accent.

- Designed for caliper & cantilever brakes - Aluminum/composite construction - 23.8/24.2mm clamp - Brake release - 320g pair - SHIMANO Equivalent BL-R400

Origin-8's Classique Sport Road Levers deliver modern braking performance with a classic look. They're made of light and tough forged aluminum with composite bodies and ergonomic rubber hoods for top comfort. They are perfect for use with sidepull, centerpull and cantilever brakes and also have quick-releases for opening your brakes for easier wheel removal/installation.

SRAM road disc brake pads are designed for use with SRAM road hydraulic disc brakes (HRD). - For use with Level Ultimate & Level TLM Brakes - Pad Material: Organic - Type: Road/CX - Includes guide pin, clip, & pad spreader

SRAM's Disc Brake Pads are reliable and rugged. These pads are compatible with Avid Trail and SRAM Guide and G2 disc brakes.

Original equipment pads for no-compromise disc brake performance. - Pad Shape Number: 37

SRAM's 500 TT ergonomic brake levers slice the wind and make a great addition to any aerodynamic speed machine. The return springs provide a solid feel and help prevent brake drag, while the aluminum levers offer pinpoint control for maximum stopping power. Plus, the internal cable routing gives a clean look and top aerodynamics.

Shimano Replacement pads for Mountain brake shoes - Color: Black - Intended Brake Type: Linear Pull - Pad Attachment Style: Threaded Post - Pad Type: Replacement Insert - Cartridge - Rim Compatibility: Standard - Shimano Cartridge-type mountain brake pads fit models: XTR BR-M970, BR-M960, BR-M951, BR-M950 XT BR-T780, BR-M770, BR-M760, BR-M750, BR-M739, BR-M737 LX BR-T670, BR-M580, BR-M570 Deore BR-M530, BR-M510 Alivio BR-M430, BR-MC18 Acera BR-M422, BR-M421, BR-M420, BR-M330, BR-T300 DXR BR-MX70 MX BR-M600 - M70R2: Severe condition brake pad, high performance in dry or wet conditions

Shimano Replacement pads for Road brake shoes - Color: Black - Intended Brake Type: Caliper - Pad Attachment Style: Bolt-In (Caliper) - Pad Type: Replacement Insert - Cartridge - Rim Compatibility: Standard - Shimano Cartridge-type road brake pads fit models: Dura-Ace BR-9000, BR-9010, BR-7900, BR-7800, BR7700 Ultegra BR-6800, BR-6700, BR-6600, BR-6500 105 BR-5800, BR-5700, BR-5500 Non-Series BR-R600, BR-R561, BR-R560, BR-CX70s

Put supreme control right at your fingertips with Shimano's Deore Two-Finger V-Brake Levers. Ergonomic lever blades are comfortable and easy to use. The internal bumber offers silent lever return, and the reach can be adjusted to fit your hands.

The Shimano Deore SM-RT54 disc brake rotors provide exceptional stopping power in all riding conditions. Shimano's Center Lock mounting system makes installing and removing rotors quick and easy thanks to the spline mount and lockring design. - Includes standard rotor lockring - External-type rotor lockring required when installing onto 15/20mm axle hubs (sold separately) - For use with resin pads only

- Aluminum pad holder with R55C4 pads

Shimano Altus BR-CT91 cantilever brakes offer confident and reliable braking at a convenient price point. - Brake Lever Actuation: Short Pull - Brake Mount Type: Canti Studs - Material: Aluminum - Pad Attachment Style: Threaded Post - Weight: 204g